Professional Enhancer Model Set Up Instructions
You will also receive the power cord, which plugs into the side of the power box just below the fan.
When the PEM is turned on, the red pilot light will illuminate. The on/off switch is located directly above the power cord plug.
You can plug the power cord into either a power strip or a wall socket, depending on your setup.
There are only three places where you will need to plug in the cords.
On the left side, you will see two plug-in ports labeled “BASE.” You can use either of these for the base connection.
The bulb plugs into the right-side port labeled “BULB.”
When you unpack your Professional Enhancer Model (PEM), you will find the base, the power box with a telescoping handle, and the bulb in its own separate box. The bulb box fits neatly on top of the power box, between the rails. This makes it a convenient place to store the bulb when not in use, as well as a practical way to keep all components of the PEM together when transporting it to another location.
The power cord plugs into the side with the fan.