CLEANING YOUR COPPER
Cover the copper with salt.
Let copper sit in the vinegar and salt for about 10-15 minutes.
Over time the vinegar will turn a greenish color.
Remove copper from plate and discard the vinegar mixture.
Rinse the copper in warm running water.
Clean the copper off with a paper towel and let dry thoroughly. You can let the copper dry in the sun or you can use a hair dryer.
Your copper will look something like this one. It will never look “brand new” but you can see that most of the blue is gone with some discoloration still present.
when thoroughly dry, your copper is ready to be installed in your cooler.
Top - Notice how the points are rounded on the top copper and both coppers are thinner than a fresh copper. To change copper, visit HERE.
Bottom - “bluish” copper has more blue deposits but could be cleaned one more time before having to replace it. To learn how to clean, see below.
To clean your copper you will need:
A large ceramic dinner plate
Salt
White vinegar
Put the copper on the plate with the bottom side up, the side that contacts the glass and turns blue. Sometimes the top of the copper will get a little blue but that does not affect the Enhancer’s performance.
You can wipe the blue residue off when you are done with the cleaning process.
Completely cover the copper with white vinegar.
Notice the vinegar is completely covering the copper.